LED Type: .25 Watt Surface Mounted Diode

Construction: Optical Grade Clear Acrylic

Panel Thickness: 0.31 in (8 mm)

Weight: 2 lbs (900g)/ft2

Operational Temp.: -22˚F min to 104˚F max

(-30˚C min to 40˚C max)

Estimated Lifespan: 50,000+ hours

Operating Voltage: 12 Volt DC

UL Listed: File E350056

Warranty: 5 Years (3 years for models sold in EMEA)

Electrical Properties

Power Consumption: 5W per ft

Coordination: Panels may be wired together in parallel, not series. Each panel must have direct connection to a power supply.

Wire Placement: The point of wire entry is customizable to accommodate your project’s tiling requirements. Please consult with your project specialist.

Dimming/Control: Rosco can provide a full suite of dimming and control accessories to complement your Custom LitePad.

Cord Length: Custom LitePad comes with a 4 ft (1.2 m) 4 core cable, 3 connections represent each of the single color LED’s for mixing and the fourth is a common ground.

Physical Properties

Single Panel Size: Max: 47” W x 118” L (1.2 m x 3 m)

Min: 6” W x 6” L (152 mm x 152 mm)

Shaping: Custom LitePads can be factory cut into just about any shape imaginable. Also, they can be drilled or tooled anywhere across the interior surface within 1 inch of its edge.

Heat Control: An integral aluminum heat sink is mounted on the rear of the panel to disperse heat build-up, reducing the need for external cooling and prolonging service life.

Thin Film Reflector: Custom LitePads include a reflective, opaque white backing to maximize optical brightness and distribution of light.

IP Rating: IP61

IP65 available on request

Acrylic Properties

Flammability Classification: 94HB

Smoke Density: (D2843) 4-10%

Deflection: Custom LitePad may bow if the panel area is too large. Broad sheets should be supported every 18 inches in any direction.

Optical Properties

LED Positioning Options: LEDs can be positioned around any number of sides or the entire circumference.