FINISH: Matte.

SOLVENT: Water.

BINDER TYPE: Vinyl Acrylic.

DILUTION: Use straight out of the can. If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.

SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.

APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.

For repainting, it is recommended to re-prime with a white primer before painting the area with Rosco Chroma Key Paints – even if the color will remain the same. The white undertone will improve the luminance of your blue or green screen.

Important: Rosco Chroma Key Paints are manufactured in batches and different batches of paint may vary slightly in color. Touching up an area already painted can result in visible patches due to color inconsistencies from batch to batch. In almost every case, these patches will not affect the performance of the product.

FILM THICKNESS: 2 mil. Dry Film.

VOC CONTENT: Max 50g/L. 

COVERAGE: Appx 32 sq. m. per 4L.

AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.

CLEAN-UP: Soap and water.

SHELF LIFE: Minimum 24 months.

PACKAGING: 4L (135 oz)

COLOR SPECIFICATIONS:

Also available Blue/Green Chroma Floor

CAUTIONS: Do not apply when surface or air temperatures are below 50°F. Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.

All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.

Product Numbers