Products on this page may not be available in your region.
Please complete this form
Designed for larger Custom LitePad installations, this system comes with power supply and controller all pre-wired and ready to integrate with an array of LitePads.
Power Input: 86 - 244 VAC
Output: 12VDC 25A
Dimming: 0-10VDC, DMX, DALI protocols
Constant voltage power supply for Custom LitePad installations. This power supply is UL recognized and addresses panels up to maximum 60W/5A.
Power Input: 115VAC or 230 VAC
Output: 12VDC 5A
Provides LED dimming via PWM (Pulse Width Modulation) or by 0-10 VDC converters. Two output Channels with maximum 2.5A output per channel; 52.5W total power output.
Input: 12-24VDC, 5.3A max.
Output: 52.5W max./2.5A max. per channel
Provides LED dimming via DALI interface. Two output Channels with maximum 2.5A output per channel; 50W total power output.
Input: 12VDC 5A max.
Output: 50W max./2.5A max. per channel
Products on this page may not be available in your region.
Please complete this form
Specifications:
Machined aluminum alloy lens holder
Precision optics
Available beam angles: 19°, 30°, 50°, 70°
Available colors: Black, Silver
For outdoor installations where the lens is mounted facing upwards, we recommend purchasing the X-Effects LED Lens Cover #297000000020. This accessory helps prevent pooling of water in the lens, which can lead to projection distortion and accelerate lens wear.
Product Numbers:
The X-Effects LED Lens Cover accessory helps prevent pooling of water in the lens for outdoor installations where an X-Effects LED lens is mounted facing upwards.
Download the X-Effects® LED Lens Cover Installation Instructions:
Download the X-Effects® LED Lens Cover Installation Instructions
Product Numbers:
Pair of protective caps to prevent water ingress and damage to the connectors of the X-Effects fixture and cable. The caps are threaded to easily screw on and off for protection when the cable is detached from the fixture.
Download the Installation Guide
Product Numbers:
This X-Effects LED Framing Shutters provide control of the fixture’s beam-size and shape. The four-leaf shutter accessory can be installed in a variety of ways along the magnetic ring around the static gobo position, allowing the fixture’s beam to be cut from the top, bottom and/or both sides.
Specifications:
Number of Leaves: Four (top/bottom/left/right)
Product Numbers:
Rosco’s 4-Pattern Gobo Wheel gobos can create unique lighting effects when inserted into an X-Effects LED Projector. Four gobo patterns are combined onto a single Dynamic-sized Black & White glass gobo to provide four different designs to rotate through, without having to remove or replace any gobos.
The 4-Pattern Gobo Wheel gobos are sized and configured specifically for the second Gobo Rotation Carrier further from the LED. This Dynamic gobo slot provides the sharpest focus for the patterns. Simply line up the desired pattern into the optical path and stop the gobo rotation to have the preferred gobo displayed.
Replacement Effects Glass Gobo for the X-Effects LED Projector.
Note – the fixture ships with two of these gobos. This single-gobo accessory is available to replace gobos that may break or become lost during use.
Product Numbers:
The Rosco Pole Mount is a rugged mounting accessory for attaching Rosco Projectors and Rosco Cube products to interior or exterior round poles.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Pole Mounts attach to any round structure via Stainless Steel Straps (kit sold separately).
Product Numbers:
The Rosco Wall Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior vertical surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
The Rosco Surface Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior horizontal surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
Products on this page may not be available in your region.
Please complete this form
Professional quality scenic fitches at an affordable price
Iddings brushes are an ideal choice for students, teachers or professional scenic artists.
These low cost scenic liners, or fitches, are carefully manufactured in the United States with long natural bristles to yield a smooth, even stroke. They can be used on a variety of stagecraft materials, including muslin, canvas, lumber and such non-porous surfaces as plastics and metal.
Because the bristles are natural, not nylon, Iddings brushes will become fully charged with scenic paint that is thinned with water, such as Iddings Deep Colors casein paint, Off Broadway, or Supersaturated Roscopaint. Each Iddings brush features a full head of tapered bristles, offering the artist an option of painting a wide or thin stroke.
Seamless nickel ferrules keep the bristles tightly bundled for effective use. Polished, sealed handles have the right heft for students and scenic artists and resist wear and damage.
Iddings brushes should be washed in warm (not hot) water immediately after use and rinsed until all traces of paint have been removed. They should be laid flat or hung by the handles for drying. Periodic cleaning of the brush head and soaping the bristles into place after cleaning will aid in maintaining its original shape, prolonging the life of the brush.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.
Products on this page may not be available in your region.
Please complete this form
Products on this page may not be available in your region.
Please complete this form
Products on this page may not be available in your region.
Please complete this form
The X-Effects LED Lens Cover accessory helps prevent pooling of water in the lens for outdoor installations where an X-Effects LED lens is mounted facing upwards.
Download the X-Effects® LED Lens Cover Installation Instructions:
Download the X-Effects® LED Lens Cover Installation Instructions
Product Numbers:
Specifications:
Machined aluminum alloy lens holder
Precision optics
Available beam angles: 19°, 30°, 50°, 70°
Available colors: Black, Silver
For outdoor installations where the lens is mounted facing upwards, we recommend purchasing the X-Effects LED Lens Cover #297000000020. This accessory helps prevent pooling of water in the lens, which can lead to projection distortion and accelerate lens wear.
Product Numbers:
This X-Effects LED Framing Shutters provide control of the fixture’s beam-size and shape. The four-leaf shutter accessory can be installed in a variety of ways along the magnetic ring around the static gobo position, allowing the fixture’s beam to be cut from the top, bottom and/or both sides.
Specifications:
Number of Leaves: Four (top/bottom/left/right)
Product Numbers:
Rosco’s 4-Pattern Gobo Wheel gobos can create unique lighting effects when inserted into an X-Effects LED Projector. Four gobo patterns are combined onto a single Dynamic-sized Black & White glass gobo to provide four different designs to rotate through, without having to remove or replace any gobos.
The 4-Pattern Gobo Wheel gobos are sized and configured specifically for the second Gobo Rotation Carrier further from the LED. This Dynamic gobo slot provides the sharpest focus for the patterns. Simply line up the desired pattern into the optical path and stop the gobo rotation to have the preferred gobo displayed.
Replacement Effects Glass Gobo for the X-Effects LED Projector.
Note – the fixture ships with two of these gobos. This single-gobo accessory is available to replace gobos that may break or become lost during use.
Product Numbers:
Rosco’s textured-dichroic ColorWaves gobos can create unique, color-blended lighting effects when inserted into an X-Effects LED Projector. These gobos are available in two sizes to fit into the Static Color/Gobo Slot or the larger (96mm) gobos to fit into the fixture’s two rotating Dynamic Effects Glass positions.
Product Number:
XXXXXX = five digit gobo number
Visit the ColorWaves page to see all of the available options: www.rosco.com/colorwaves
Rosco’s clear, textured Image Glass gobos can create unique lighting effects when inserted into an X-Effects LED Projector. These gobos are available in two sizes to fit into the Static Color/Gobo Slot or the larger (96mm) gobos to fit into the fixture’s two rotating Dynamic Effects Glass positions.
Product Number:
XXXXXX = five digit gobo number
Visit the Image Glass page to see all of the available options: www.rosco.com/imageglass
The Rosco Pole Mount is a rugged mounting accessory for attaching Rosco Projectors and Rosco Cube products to interior or exterior round poles.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Pole Mounts attach to any round structure via Stainless Steel Straps (kit sold separately).
Product Numbers:
The Rosco Wall Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior vertical surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
The Rosco Surface Mount allows for mounting Rosco Projectors and Rosco Cubes to interior or exterior horizontal surfaces.
Powder-Coated Steel support that provides rigid attachment and a clean, mounted installation.
1-3/5” (42mm) open tubing provides room for power/data cables for a clean installation.
Product Numbers:
Products on this page may not be available in your region.
Please complete this form
Professional quality scenic fitches at an affordable price
Iddings brushes are an ideal choice for students, teachers or professional scenic artists.
These low cost scenic liners, or fitches, are carefully manufactured in the United States with long natural bristles to yield a smooth, even stroke. They can be used on a variety of stagecraft materials, including muslin, canvas, lumber and such non-porous surfaces as plastics and metal.
Because the bristles are natural, not nylon, Iddings brushes will become fully charged with scenic paint that is thinned with water, such as Iddings Deep Colors casein paint, Off Broadway, or Supersaturated Roscopaint. Each Iddings brush features a full head of tapered bristles, offering the artist an option of painting a wide or thin stroke.
Seamless nickel ferrules keep the bristles tightly bundled for effective use. Polished, sealed handles have the right heft for students and scenic artists and resist wear and damage.
Iddings brushes should be washed in warm (not hot) water immediately after use and rinsed until all traces of paint have been removed. They should be laid flat or hung by the handles for drying. Periodic cleaning of the brush head and soaping the bristles into place after cleaning will aid in maintaining its original shape, prolonging the life of the brush.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.
Products on this page may not be available in your region.
Please complete this form
Professional quality scenic fitches at an affordable price
Iddings brushes are an ideal choice for students, teachers or professional scenic artists.
These low cost scenic liners, or fitches, are carefully manufactured in the United States with long natural bristles to yield a smooth, even stroke. They can be used on a variety of stagecraft materials, including muslin, canvas, lumber and such non-porous surfaces as plastics and metal.
Because the bristles are natural, not nylon, Iddings brushes will become fully charged with scenic paint that is thinned with water, such as Iddings Deep Colors casein paint, Off Broadway, or Supersaturated Roscopaint. Each Iddings brush features a full head of tapered bristles, offering the artist an option of painting a wide or thin stroke.
Seamless nickel ferrules keep the bristles tightly bundled for effective use. Polished, sealed handles have the right heft for students and scenic artists and resist wear and damage.
Iddings brushes should be washed in warm (not hot) water immediately after use and rinsed until all traces of paint have been removed. They should be laid flat or hung by the handles for drying. Periodic cleaning of the brush head and soaping the bristles into place after cleaning will aid in maintaining its original shape, prolonging the life of the brush.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.
Products on this page may not be available in your region.
Nearly 200 X-Effects Projectors transformed The Blue Paradox into an immersive experience for raising awareness about the ocean plastic crisis.
Products on this page may not be available in your region.
Designers used Rosco Image Spot and Image Spot Mini gobo projectors to create their "Picture Poem" lighting project along Skårersletta Street in Lørenskog, Norway. Artwork created by Pierre Lionel Matte.
Your request is important to us.
We will respond as soon as possible during regular business hours.
Need help right away? Check out our frequently asked questions page here: FAQs
