Finish: Flat/Matte

Solvent: Water

Binder Type:Vinyl Acrylic

Dilution: VividFX should be used straight out of the can. It can be diluted with water if necessary, however, this may reduce the hiding power of the paint as well as the "glow" under UV lights.

Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects.

Application: Stir contents well before use. Apply by brush, roller or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.

Film Thickness: 2 mil. Dry Film.

Coverage: Approximately 300 sq. ft. per gallon (28 sq. m. per 3.79L), depending on application method, tool used and film thickness.

Avg. Dry Time: At 75°F (24°C), dries to the touch in 30-45 minutes. Can be recoated in 1-2 hours.

Clean-up: Soap and water.

Shelf Life: Minimum shelf life for unopened, sealed paint is approximately 24 months when stored in a temperature controlled location.

Packaging: Gallon, Quart and Pint Cans (3.79L, 0.946L and 0.473L).

Fluorescent pigments will degrade from prolonged exposure to ultraviolet light. Avoid direct sunlight where possible.

VividFX paints are compatible with the other Rosco Scenic Paints. Use VividFX Paints mixed into standard scenic paint when matching the brightest Pantone colors. VividFX uses the same high quality, water-base, vinyl acrylic binder found in Off Broadway paints. It is suitable for use over most surfaces.

Rosco's VividFX paints have been designed specifically to meet the demanding needs of the special effects artist. The brilliant pigments used create stunning blacklight effects.

The VividFX line of high quality UV paints offers a special effects artist something new and exciting: performance and dependability in a ultra-violet paint. With such a wide range of colors VividFX is up to the challenge of almost any project. Whether its a fantastical matte painting, a spectacular scenic effect that transforms under blacklight or just a simple "dayglo" effect, VividFX paint will help create extraordinary results with less work for the artist trying to find just the right color.

Night clubs, restaurants, bowling alleys, amusement parks, corporate meetings all are making use of the exciting effects that can be created using UV paints. For these jobs, VividFX is the perfect choice. The color palette is wide, and the performance exceptional. But more importantly, these paints are available wherever the project is happening, anywhere in the United States, anywhere in the world. With over 400 dealers nationwide and offices and distribution networks in over 30 countries around the world, you can be assured that when VividFX is specified in the design, it will be available.

CAUTIONS: Do not apply when surface or air temperatures are below 50°F (10°C) Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.

All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.

Product Numbers